Marco Ecoboiler T10
Marco Ecoboiler T10

Water heater Marco Ecoboiler T10



Hot Water Beverages Systems

Brand: Marco

Professional water heater Marco Ecosmart PB10. Ideal for brewing coffee and tea in hotels, restaurants, resorts, offices and cafe shop. Authorized import from Europe. LCD screen for precise temperature control.

  Buy Now


- Easy to descale
- Removeable drip tray
- Made from 95% recyclable materials
- Energy-efficient with precise temperature
- Perfect for banquets, event or sports venues, nursing homes, hospitals, cafés, canteens, hotels and large restaurants


- Size (WxHxD): 21 x 59 x 51.5 cm
- Voltage/Power: 230V/ 2,800W
- Immediate draw off: 10L
- Tap to counter: 18.5 cm
- 28 litres output per hour
- 156 cups (180ml) per hour


The Ecoboiler T10 is an energy efficient water boiler with a compact footprint that plumbs directly into a mains supply and is suitable for the catering environment. The T10 provides you with a constant supply of boiling water for tea and coffee saving you the hassle and the time wasted using kettles. Ideal for all locations - hotels, restaurants, kitchens, coffee shops and canteens.


  • The “power on” light will glow green and the machine will fill to a safe level, above the elements, before heating.
  • The “Ready/Status” light will cycle two red flashes while the machine is filling to the safe level.
  • After this amount of water has heated to about 96°C the boiler will draw more water in until the temperature drops by 1 or 2 degrees. The boiler will then heat again. This heat fill cycle continues until the boiler is full.
  • On a 10L machine, whilst the machine is above the safe level and filling, the “Ready/Status” light will remain blank.
  • The “Ready/Status” light will glow green when the machine is both full and up to normal operating temperature.

The Ecoboiler control PCB (1600345) has the ability to have the desired set-point temperature at whatever setting is required. During manufacture of the PCB it is set to the default temperature of around 95°C.

ECO Mode Operation:

All ECO Boilers use high grade insulation and it is applied to give a significant energy usage improvement over a standard water boiler.

The 10L ECO Boiler variants also incoprate a ½ tank ‘ECO mode’ function.

To enable the ‘ECO Mode’ press the button located below the ‘Ready’ indicator so that the leaf symbol illuminates green.

This mode saves energy by mimimising the energy wasted during machine down-time.

· NOTE: The ECO mode is most effective in installations where the machine has a regular ‘off’ period.

To achieve the most benefit from the energy saving ‘ECO Mode’ on your ECO boiler unit (10L variants only), the following method should be employed:

Towards the end of the boilers operating period for a given day, switch the machine to ECO Mode. Whilst maintaining water at 96oC, the machine tank will slowly drop to half full, where it will remain.

At the end of the machines operating period it should the be turned ‘off’.

 To disable simply press the ‘ECO Mode’ button again so that the leaf symbol is not illuminated.

Note when Use:

To prevent chafing of the cable, do not let the mains cord hang over the edge of a table or counter ; or touch hot surfaces.

Switch off at the mains (unplug or disconnect from outlet) and turn off the water supply when not in use and before cleaning. Allow to cool before removing components.

Do not use outdoors. Do not place on or near a hot gas or electric burner.


 ,  ,  , 

Cubes Asia

About Us